Horiba LAQUAtwin Koffer NO3-11C meter ( Nitraat-meter )

Horiba LAQUAtwin Koffer NO3-11C meter ( Nitraat-meter )

The unique sensor in the meter can take measurements in viscous (viscous) liquids, solids and even powder. You do not need a cup for calibrating the meter or for measurements, you simply place a few drops of the solution of a small sample on the flat sensor. With this method you save time and you also do not waste anything on your valuable sample.

The meter uses an Ion Selective Electrode that has a range for NO3 from 6 to 9900ppm (mg / L) (0.1 to 160 mmol) and for NO3-N from 1.4 to 2200ppm (mg / L). The resolution that is shown is as follows:

• 0 to 99 ppm: 1 ppm
• 100 to 990 ppm: 10 ppm
• 1000 to 9900 ppm: 100 ppm

The precision that the meter indicates with your measurements is ± 10% of the value of your sample. You can set 2 checkpoints for your measurements.

The displayed temperature on the screen is from 0 to 50.0°C, the temperature is displayed at intervals of 0.1°C.

• The functions on this meter:
• Automatic standard recognition
• Adjustable low and high calibration point
• Temperature compensation
• Temperature calibration
• Multiplication compensation (0.01 to 9.90)
• Auto Hold / Stable
• Automatically off after 30 min
• Low battery indicator
• IP67 water / dust resistance
• Replaceable sensor

The screen is from Custom (Monochrome) Digital LCD, the meter itself can be used for about 400 hours (without the lighting). The operating temperature ranges from 5 to 40 ° C. It can handle up to 85% humidity, but less at relative humidity (without condensation). The meter is made of ABS epoxy with a flat glass sensor. The dimensions embrace 164 x 29 x 20 mm (without protrusion) and the sensor weighs 55 g (including the sensor and batteries).

Included accessories:

• 150 & 2000 ppm Standard (both 14ml)
• Sampling Sheet B (5 pieces)
• CR2032 Batteries (2 pieces)
• Dropper
• Instruction & short manual
• Storage Case