The Vents TT Silent-M 160 R Mixed-Flow Fan has a soundproof housing made of polymer-coated steel. The design not only guarantees quiet operation, but also excellent aerodynamic properties. The inside consists of durable, high-quality plastic with a heat and sound-damping layer of 50 mm mineral wool.
Out-of-Stock
The Vents TT Silent-M fans combine the many possibilities and high performance of both axial and centrifugal fans, thus ensuring a powerful air flow and high pressure. This type of fan is recommended as part of air handling systems for various commercial and industrial buildings with high noise requirements, such as libraries, conference rooms, educational institutions, kindergartens, and so on.
The Vents TT Silent-M 160 R Mixed-Flow Fan has a soundproof housing made of polymer-coated steel. The design not only guarantees quiet operation, but also excellent aerodynamic properties. The inside consists of durable, high-quality plastic with a heat and sound-damping layer of 50 mm mineral wool. Thanks to the use of sound-absorbing material and perforations on the inside, sound damping over a wide frequency has been achieved. The sound waves are guided through the holes and strike the sound-damping layer at a specific angle for silent operation.
Another advantage is the higher air pressure and air capacity compared to standard axial fans. This is partly due to the conical rotor and the specially developed profile. The diffuser, impeller and directional vanes ensure that the air flow is distributed in such a way that the best combination of high performance, increased pressure and low noise level is achieved.
The fan is equipped with a single-phase, energy-efficient motor with thermal overheating protection to prevent overloading of the motor. The ball bearings extend the service life of the motor to 40,000 hours for non-stop use. You can control the speed with an external switch for fans with multiple speeds (available separately).
Fitting the fan is very easy. It can be mounted in any location and at any angle in the ventilation system. With the corresponding mounting brackets you can mount the fan on the floor, wall or ceiling. Installing multiple fans in parallel within one system is no problem. Also handy: the fan is supplied including cord and plug.
Specifications
You might also like
